Fire Batt – Nullifire FB750Fire Rated Access PanelsPlasterboard and lath & plaster ceilingsElectrical Passive Fire Protection30/60 minute protection to timberClass 0 Spread of Flame ProtectionExternal BasedInternal ProtectionFire Resistant Sealant – Nullifire F5 702Load Bearing Fire Stop CompoundFire Collars – Nullifire B150Fire Wraps – Nullifire B300Fire Resistant Silicone Sealant – Nullifire M703Cavity Barrier (Curtain Wall)Cavity Barriers (Attics)

Fire Batt – Nullifire FB750

Nullifire B747 is a lightweight fire barrier comprising of a mineral fibre board coated with ablative water based sealant which can provide up to 4 hours fire protection. B747 Fire Batt prevents the passage of fire and smoke by re-instating the compartment floor or wall when penetrated by building services. In order for the system to perform as certified it needs to be used in conjunction with fire rated mastic. This system also provides thermal acoustic and air sealing performances.
Read more

Fire Rated Access Panels

Fireseal supply a wide range of fire rated and non-fire rated access panels for installation in walls and ceilings. The PALCO “Flue Safe” access panel can provide in excess of 60 minutes integrity and insulation to a horizontal installation and comes in a variety of standard sizes (300mm X 300mm; 450mm 450mm; 600mm X 600mm).
Read more

Plasterboard and lath & plaster ceilings

The Envirograf EPCP intumescent system (product 105) is a paint application that can upgrade existing plasterboard and lath & plaster ceilings to 60 minutes integrity, insulation and load bearing fire resistance. It is especially useful when upgrading heritage properties without compromising the original architectural detail or having to lift floorboards from above.
Read more

Electrical Passive Fire Protection

Fireseal supply & stock the widest range of electrical passive fire protection products available in Ireland through our UK partner – Envirograf. From trunking pillows to downlighter covers we stock an array of solutions in varying sizes. For the full selection of Envirograf Electrical products available please click link below.
Read more

30/60 minute protection to timber

The HW System (Product 42) offers a range of clear, coloured or white coatings designed to upgrade new and existing timber substrates, offering up to 30 or 60 minutes fire protection meeting both UK National and European Fire Regulations. The HW range can also upgrade wood panelling up to 60 minutes depending on the thickness and type of wood. For the full selection of Envirograf coatings available please click link below.
Read more

Class 0 Spread of Flame Protection

The Envirograf ES/VFR System (product 92) offers a clear or white fire retardant coating for upgrading or wood related surfaces to a class 0 and class 1 classification (UK standards) or a SBI: B/s1/d0 (EU Standard). The system is suitable over both hard and soft woods including substrates such as new & existing timber, bamboo, chipboard, hardboard, MDF and veneered board. It can also be applied over existing paints and varnishes according to application details.
Read more

External Based

Nullifire S Systemallows on site and off site solvent based decorative intumescent coating for structural steel. It can provide 30, 60, 90 & 120 minute fire protection. The S system offer fast applied robust fire protection and decoration for structural steelwork. It is generally used where there will be a high degree of exposure to…
Read more

Internal Protection

Nullifire S802 allows on site and off site waterborne decorative intumescent coating for structural steel. It can provide 30,60, 90 & 120 minute fire protection. See data sheet for Nullifire S802– PDF Nullifire S708 is the eco friendly alternative to solvent based products. It offers a faster, safer protection for 30 & 60 minute protection on…
Read more

Fire Resistant Sealant – Nullifire F5 702

Nullifire M701 Fire Resistant Sealant is a single-part water based fire resistant acrylic sealant for use on all building and construction joints. It can provide up to 5 hours fire protection at building gaps and moveable joints whilst allowing for 20 % movement. It also provides fire protection around service penetrations. M701 Fire Resistant Sealant is used in conjunction with Fire Batt to fire-stop penetrations in compartment walls and floors. This sealant system also provides acoustic and air sealing performances and is available in grey and white.
Read more

Load Bearing Fire Stop Compound

Nullifire B270 Fire Stop Compound is a single-part gypsum based compound providing up to 4 hours fire resistance. It is designed to re-instate the fire resistance of the compartment wall or floor, whilst providing an unsupported load-bearing capacity up to 2.5kN/m2 (UDL), up to a 1800mm span, in accordance with BS 6399-1:1996 minimum requirements. This system also provides thermal, acoustic and air sealing performance.
Read more

Fire Collars – Nullifire B150

Nullifire B150 is a galvanised steel surface mounted intumescent fire stop pipe collar. In the event of a fire, B150 prevents the passage of fire and smoke by closing off the aperture within the compartment floor or wall when penetrated by plastic pipes.
Read more

Fire Wraps – Nullifire B300

Nullifire B300 Intumescent Wraps are a simple to use, self adhesive intumescent pipe wrap. They fit around the circumference of the pipe within the depth of the substrate. In the event of a fire, it prevents the passage of fire and smoke by closing off the aperture within the compartment floor or wall when penetrated by plastic pipes.
Read more

Fire Resistant Silicone Sealant – Nullifire M703

Nullifire M703 Fire Resistant Silicone Sealant is a single-part alkoxy-based fire resistant, elastomeric, neutral cure silicone sealant. The product provides up to 5 hours fire protection at internal and external building gaps and movement joints as well as allowing up to 50% movement. It also provides fire protection around service penetrations and ensures that the acoustic performance of the substrate is maintained. M703 has been fully tested to comply with the air leakage requirement of ‘Approved Documen
Read more

Cavity Barrier (Curtain Wall)

Cavity Barrier systems are made from high density Rockwool stone wool and is suitable for use in all cavity walls, as well as for fire stopping between a curtain wall system and a concrete floor slab. The barrier prevents the passage of flame and smoke within the cavity it fills for the period of fire rating. Fireseal specialise in installing Rockwool, Lamatherm and AIM Cavity Barrier Systems.
Read more

Cavity Barriers (Attics)

Nullifire B810 Fire Curtain is designed for use in all building and construction joints. It is a specially coated, woven glass fibre blanket. Nullifire B810 Fire Curtain can provide up to 2 hours fire and smoke protection to large unsupported openings. Typical uses would be subdivision in an attic void and partitioning the void below a raised floor.
Read more